Qualification first.
Traceable hardware, dimensional measurements, inspection and material assessment establish what can safely advance into development.
The J57 conversion program
The goal is to retain qualified aerospace turbine hardware and engineer the systems that let externally supplied steam drive stationary electrical generation.

A change in application
The J57 is an axial-flow turbojet. In its original role, hot combustion gases pass through the turbine. AVP’s concept changes the working fluid and the application: externally produced steam would expand through qualified turbine hardware to deliver shaft work for electricity generation.
The reference architecture includes one high-pressure turbine row and two low-pressure rows on independent coaxial shafts. Both shaft systems require appropriate power takeoffs, mechanical support, controlled loading and protection.
Retaining the original rotating blades is a central design requirement. Donor identity, condition, materials and remaining life must support the selected steam duty. Conversion details follow those findings.
Traceable hardware, dimensional measurements, inspection and material assessment establish what can safely advance into development.
Steam admission, pressure boundaries, seals, supports and shaft loading must work together as a controlled system.
An instrumented prototype must establish output, heat input, auxiliary demand, operating behavior and the condition of the hardware after testing.
The energy pathway
The concept brings an established energy principle to a different starting point: qualified aerospace turbine hardware.
Conceptual energy flow · not a released engineering schematic
A compatible external source supplies the heat needed to produce steam. The first design decision is the available thermal resource and the steam conditions it can support.
System boundary: the heat source remains part of the complete energy and cost balance.Steam carries energy supplied by an external heat source. Prototype testing will establish electrical output, efficiency and water-recovery performance for a defined operating duty.
Read the technology overviewWhat the conversion includes
A useful generation package needs a defined mechanical, thermal and electrical boundary. Our development plan addresses each interface.
| System element | Development focus |
|---|---|
| Original rotating hardware | Donor-specific acceptance of blades, disks and shafts for the proposed steam duty. |
| Steam admission | Engineered passages that match the retained blade geometry and relative flow requirements. |
| Pressure enclosure & supports | Steam and exhaust boundaries, seals, bearing arrangements, thermal growth and mechanical loads. |
| Shaft loads & generation | Appropriate high- and low-pressure power takeoffs, electrical equipment and coordinated control. |
| Protection & measurement | Independent protective functions, calibrated instrumentation and defined operating limits. |
| Water recovery & cooling | Condensation, heat rejection, water-quality monitoring and suitable condensate return. |
| Host-site integration | Steam availability, thermal opportunity cost, electrical connection, auxiliaries and maintenance requirements. |
Recovery with a defined purpose
Our companion recovery concept uses an enclosed exhaust path, a surface condenser, a collection point and water-quality monitoring. Suitable condensate would return to the steam system for reuse.
Condensation requires heat rejection. Cooling equipment and pumps use energy, and water losses can arise from vents, leakage, blowdown and treatment. The complete site balance must account for those demands.
The objective is practical recovery supported by measurements. Water reuse does not replace the heat needed to produce steam, and the proposed conversion does not yet carry a demonstrated recovery or efficiency rating.
Request a technical conversationEvidence guides the next step
AVP is seeking technical collaborators, suitable test resources and prospective host sites for the next stage of development.
Engineering background
These references explain established principles. They do not validate the proposed AVP conversion or imply endorsement by the referenced organizations.